1. Walk – In – Cold Room
-
FEEL THE INNO COOL EXPERIENCE. Every component of the cold room is designed forreliability and robust operation through its life. The best selection of refrigeration equipment gives faster temperature pull down. An excellent insulation panel system, manufactured in Inno cool factories understringent conditions offers great power saving with lesser ON cycle
-
Excellent air tightness and free of thermal bridges which results on considerable energy savings.
-
In response to current growing needs of the cold chain in India, Inno cool has developed this new range of cold rooms based on application, Customer usage and more important, user friendly operation
-
Accurate monitoring of equipments, tighter temperature control, faster recovery, more OFF cycles have resulted in quicker payback and lesser total cost of owner to the owner
-
The Inno Cool team guides you through the selection of the most optimum size and machine requirements for your chilling and freezing & blast freezing requirements
-
Cold Room Operating Temperature range form +2 Deg C to – 40 Deg C.
2. Pre Fabricated Puf Panels
These panels are modular in nature and pre fabricated sandwich type CFC Free panels, available in standard, modular lengths starting from 300mm, Height ranges from 12mt. The panels consists of two outer skins with an inner insulated core made up of self extinguishing Rigid - Polyurethane Foam with high insulation co-efficient of 60 -80 -100 -120 -150 mm thickness for Chiller & Freezer applications. INNO COOL PANELS:
Broad specification of the panels and PUF shall be as follows:
-
Density : 40+2 kg/cu.m
-
K-value of insulation: approx. : 0.35 W per sq.m per deg. K
-
Thermal conductivity : 0.023 W/sq.m/deg.K (AGED)
-
Compressive strength : 2.1 kg/sq.m(0.1-0.3 N/sq.mm)
-
Tensile strength : 3.7 kg/sq.m
-
Bending strength : 2.9 kg/sq.m(0.1-0.3 N/sq.m)
-
Adhesion strength : 2.9 kg/sq.cm
-
(PUF to steel) (0.1-0.5 N/sq.m
-
Closed cell contents : 90 to 95%
-
Water Absorption : 0.2% by volume at 100% RH
-
Vapour permeability : 0.08 to 0.12 gm/hr/sq.m at 90% RH And 38 deg. C
-
Thickness of outer sheets : min. 0.5 mm
-
Material of outer sheets : Profiled Galvanised Sheet Steel / S.S / FRP with
tread / depth of profile approx. 5 mm
3. Refrigeration Units
The heart of Cold Generation, INNO COOL Cold Room are equipped with the latest state of art of Refrigeration System’s Consist of:
Out Door Unit comprising of
-
Air cooled Or Water Cooled Condensing systems
-
Hermatic Or Semi hermatic compressors
-
High Efficiency Evaporators equipped with Auto Hot
-
All metallic Casings in Galvanized steel with powder coating finishes to withstand H500 SS test
-
Safety systems like High & Low pressure cutouts, Microprocessor based Digital Display thermo controls and Electronic control Panel
In Door Unit comprising of
-
Stainless Steel Evaporator and mounted inside the cold room and condensate drain provided from it
-
The inter connection of indoor unit and the out door unit with inner grooved copper refrigeration pipe line and electrical wiring
-
Our indoor units are encased with Imported Fan motors
-
Our indoor units are fitted with high capacity and life time lubricated fan motors imported from Germany
-
Our cooling coils made up of inner grooved copper tubes for more heat transfer efficiency
4.TUNNEL FREEZER
Inno Cool Offer 250 L / 500 L / 1000 L
Capacity.Special Features of tunnel freezer.
Our special product TUNNEL Freezer having Pull Down time 2 Hour for CHOCO bar Mould & Ice Blocks hrs at -38 Deg C >
With in 1 ½ hrs pull down time Tunnel Freezer will hardening Material @-35DegC.
In Pharmaceuticals make Gel pack with in 2 hrs to get hardening
Inno Cool Offer 250 L / 500 L / 1000 L Capacity.
5. RIPEINING CHAMBER / FRUIT / VEGETABLE COLD STORAGES
Ripening chamber for Banana / Mango / Guva / Papaya as per DIN Standard
Temperature:
Different fruits need different temperatures to get optimum ripening, the rough thumb rule is that the temperature for ripening will be the lowest possible temperature the fruit can withstand without injury. Generally all fruit ripening temperatures fall between 18 deg cent. to 22 deg. cent.
Ethylene:
A catalytic Ethylene generator capable of bringing ethylene levels to 400 ppm in closed rooms of 200 cu. meters is provided. This can be optionally controlled from the central microprocessor unit.
For larger facilities we have developed a centralized system.
Ventilation:
Every fruit respires and from time to time air changes are necessary as oxygen levels drop and co2 levels increase. In order to decrease co2 levels air changes are effected by a speci ally designed blower, which is used for ventilating.
Methodology – I
Thro Ethylene Cylinder & Circulation Line Controls Consists of :
Ethylene Circulation copper pipe
Pressure Gauge (psi)
Valve Control
Timer
Ethylene Cylinder (Customer Scope)
Temperature
Humidity
Ventilation
Oxygen , Ethylene and CO2 display (optional)
microcontroller based controller
Methodology – II
Ethylene Generator Method Consists of :
Temperature
Humidity
Ventilation
Timer
Ethylene injection
Oxygen and CO2 display
Microcontroller based controller
|
